Mild Steel Lacing Anchors
Insulation Lacing Anchors are used in the production of insulation blankets or removable covers and pads. The pin is pressed through the insulation layer, so the hook portion sits on the top edge and the pin is locked on the opposite side of the insulation with a washer. The two sides of the insulation materials can then be “laced” together by the hooks with tie wire.
Low Carbon Steel
Material specifications or certification available upon request.
Mild Steel pins are galvanized, Mild Steel tops are zinc plated.
All steel pins are fully annealed unless otherwise specified.
Self-locking washers are available in a variety of sizes, shapes, and materials.
Domed Caps can also be used to cover the tip of the nail.
Size – D
12 GA & 14 GA are standard. Other sizes are available upon request.
Length – L
2-1/2″ & 4-1/2″ are standard. Other lengths available upon request .
Low Carton Steel Series 93 Lacing Anchors
Standard Diameter : 12 GA ,14 GA Standard Length : 2-1/2 , 4-1/2″
Get Your FREE Non-obligation Quote:
We honor our every customer and would never cheat and misrepresent our product. You are welcome to ask any question about our product and be sure to receive a honest answer.
- Stainless Steel Lacing Anchors
- Mild Steel Lacing Anchors
- Lacing Washers
- Lacing Hooks
- Round Self-Locking Washers
- Square Self-Locking Washers
- Cupped Head Weld Pins
- Duct Liner Pins
- Quilting Pins
- Perforated Insulation Hangers
- Self-Stick Insulation Hangers
- 90° Insulation Angle Hanger
- J Hooks
- CD Insulation Weld Pins
- Welding Equipment